Volume : 10, Issue : 05, May – 2023
Title:
74.A REVIEW ON COMPARISON OF DRYERS
Authors :
Shilpa Santhosh*, Subash Chandran M P, Prasobh G R, Aparna M R*, Gopika Gopi*
Abstract :
It is a mass transfer process resulting in the removal of moisture or another solvent, by evaporation from a solid, semisolid or liquid to end in a solid state. To achieve this, there must be a source of heat. Drying is most used in manufacturing as a unit process in the preparation of granules, which can be dispensed in bulk or converted into tablet or capsules. The present work is aimed to explain comparison of different dryers.
Keywords: Drying, Hot air oven, Tray dryer, Vacuum dryer, Drum dryer
Cite This Article:
Please cite this article in press Shilpa Santhosh et al, A Review On Comparison Of Dryers., Indo Am. J. P. Sci, 2023; 10 (05).
Number of Downloads : 10
References:
1. Subrahmanyan CVS, Shetty TJ, Suresh S, and Devi KV: Vallabh Prakashan Delhi. 2005; 9:70-120.
2. Mc Cabe WL, Smith JC and Harriot P: unit operation of chemical engineering.2018: 6:238-264.
3. Haque N, Jangam SV, and Mujumdar AS: ‘Life cycle assessment of drying systems in handbook of industrial drying, CRC Press New York USA. 2015; 10:1229-1238.
4. Sambamurthy K, Pharmaceutical engineering. New Age International, 2007; 5:279-396.
5. Lachman L, Lieberman HA and Kanig JL; The theory and practical of industrial pharmacy. 2009; 8:3-30.
6. Remington JP, Remington: The science and practice of pharmacy.2013;1:453-757.
7. Patel SK and Bade MH: “Energy targeting and process integration of Tray dryer with heat recovering system”, Energy convers. Manag.2020;221:113-148.
8. Mc Donagh AF and Tajber L: “The control of paracetamol particle size and surface morphology through crystallization in spray dryer”, Adv. Powder Technol. 2020; 31:287-299.
9. Gonzatti MB et al: “Nano tray dryer for vectorizing galactosyl ceramide in polymeric nanoparticle: a single step process to enhance in variant natural killer T lymphocyte response” Int.J. Pharma. 2019; 565:123-132.
10. Srinivasa Kannan C and Balasubramanian N: “Analysis of modeling of fluidized bed dryer of granular material”, Adv. Powder Technol.2008;19;73-82.
11. Burgschweiger J and Tsotsas E: “Experimental investigation and modeling of continuous fluidized bed dryer under steady state and dynamic condition”. Chem.Eng.Sci.2002; 57:5021-5038.
12. Senadeera W, Alves-Filho O and Eikevik T: “Influence of drying condition on the moisture diffusion and fluidization quality during multiple stage fluidized bed dryer of bovine intestine for pet food.2013; 91:549-557.
13. Daoussi R, Vessot S, Andreu J and Monnier O: “sublimation kinetics and sublimation end point time during freeze drying of pharmaceutical active principle with organic co-solvent formulation” Chem.Eng. Res.Des.2009;87:899-907.
14. Hall S, Pacek AW, Kowalski AJ, Cooke M and Rothman D: “The effect of scale and interfacial tension of liquid- liquid dispersion in in-line silverson rotor stator mixer” Chem.Eng. Res.Des.2013;91:2156-2168.
15. Simons TAH, Bensmann S, Zigan S, Feise HJ, Zetzener H and Kwade A: “Characterization of granular mixing in a helical ribbon blade blender” Powder Technol.2016; 293:15-25.
16. Espinoza CJU, Alberini F, Mihailova O, Kowalski AJ and Simons MJH: Flow, turbulence and potential droplet break up mechanism in an in-line silverson150/250 high shear mixer, Chem.Eng.Sci.2020;6:150.
17. Colucci D, Maniaci R, and Fissore D: Monitoring of the freezing stage in a freeze-drying process using IR thermography, Int.J. Pharma.2019;566:488-499.
18. Badger WL: Introduction to chemical engineering.1995;10:469-519.
19. Sabarez H: Advanced drying technology of relevance in the industry.2020;8:212-310.
20. Achariyaviriya A, Tiansuwan J, Soponronnarit S: Energy optimization of whole longan drying. Simulation results. Int J Ambient energy.2002;23:212-220.
21. Beker CGJ: Energy efficiency in drying. Stewart post-harvest Rev.2005; 4:8-12.
22. Drouzas AE, Schubert H: Microwave application in vacuum drying of fruit. Int.J.Eng.1996; 28:203-209.
23. Filkova I, Majumdar AS: Industrial spray system. Handbook of industrial drying, New York. Marcel Dekkar Inc.1995; 12:263-307.
24. Gunasekaran S: Pulsed microwave-vacuum drying of food materials. Drying Technol.1996; 14:1419-1427.
25. Masters K: Current market driven spray drying activities. Drying Technol.2004; 22:1351-1370.